Idiomas disponibles
Idiomas disponibles
LUBRICATION
Allofthe
bearings in this tool are lubricated with a sufficientamountof high-grade
lubricantfor the life of the tool under normal operating conditions. T herefore, no
further lubricationis required.
DOUBLE INSULATION
Double insulation is a conceptin safety in electric power tools,which eliminates the
need for the standard 3-wire grounded powercord. All exposed metal parts are
isolatedfrom the internal motor componentswith protectveinsulation.Double
insulatedtools do not need to be grounded.
IMPORTANT
The servicingof a tool with double insulationrequiresextreme care and knowledge
of the system and should be performedonly by a qualified service technician. For
service, we recommend that you return the tool to your nearest Sears Service Center
for repair.ALWAYS use originalfactory replacement parts when servicing.
EXTENSION CORDS
The use of any extension cord will cause some loss of power.To keep the loss at a
minimum and to preventoverheating,use an extensioncord that is heavy enoughto
carry the current that the toolwill draw.
A wire gauge (AWG) of at least 16 is recommendedfor an extensioncord 100 feet or
less in length. When workingoutdoorsALWAYS use an extension cord that is
suitablefor outdoor use. The cord'sjacket will be marked WA.
I/_
CAUTION:
Keep extension cordsaway from the cuttingarea, and position I
I
the cord so it will not get caught on lumber,tools, etc. during the cutting operation
I
I/K
DANGER:
Check extension cords before each use. if damaged, replace
I
I
it immediately. NEVER use a tool with a damaged cord because touching the
I
damaged area could cause electrical shock, resulting in serious injury.
Extension cords that are suitablefor use with your saw are available at your nearest
Sears Store.
20
