Hilti SID 8-A22 Manual De Instrucciones Original página 21

4.2.2 Total vibration (vector sum of three directions), measured in accordance with EN 60745
Vibration emission value when tightening bolts and nuts of the maxi-
mum permitted size (a
h
Uncertainty (K)
4.3 Battery
Rated voltage
Capacity
Weight
Rated voltage
Capacity
Weight
5 Operation
Charging the battery
Note
Make sure that the outer surfaces of the battery are clean and dry before inserting the
battery in an approved battery charger.
Read the operating instructions for the charger for further information about the charging
procedure.
Inserting the battery
WARNING
Risk of injury! Inadvertent starting of the impact screwdriver.
▶ Before fitting the battery, check that the cordless impact screwdriver is switched off
and that the forward/reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Risk of injury! Hazard presented by a falling battery
▶ A falling battery may present a risk of injury to yourself and others. Check that the
battery is securely seated in the power tool.
WARNING
Electrical hazards! Risk of short circuiting
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts
in the impact screwdriver are free from foreign objects.
Removing the battery
Inserting the accessory tool
CAUTION
Risk of injury! Hazard presented by a falling accessory tool.
▶ Use only accessory tools of the locking type, designed specifically for impact
screwdrivers.
▶ Before use, make sure that the accessory tool is correctly fitted or positioned and
securely engaged.
▶ Do not use worn or damaged accessory tools.
Removing the accessory tool
Setting forward or reverse rotation
Note
In the middle position, the forward / reverse selector switch serves as a safety lock.
16
Printed: 20.05.2015 | Doc-Nr: PUB / 5230112 / 000 / 00
)
B 22/1.6 Li­Ion
21.6 V
1.6 A⋅h
0.48 kg
B 22/5.2 Li-Ion
21.6 V
5.2 A⋅h
0.78 kg
13.5 m/s²
1.5 m/s²
B 22/2.6 Li­Ion B 22/3.3 Li-Ion
(02)
21.6 V 21.6 V
2.6 A⋅h 3.3 A⋅h
0.48 kg 0.78 kg
2
3
4
5
6