Idiomas disponibles
Idiomas disponibles
OPERATING
CONTROLS.
POWER
SWITCH
When the power switch is turned on, ihe. cslculiter is ready for opera-
, tion, (See IMPORTANT-NOTE on page 1}
DECIMAL/ADD
MODE
SELECTOR
4, Decimal position (F,-6, 3, 2, 1,0} :
Pre-sets the number of decimal places in the answer,
In the "F' position, the answer is displayed in the floating system.
2. Add mode position {A}:
The decimal point in addition and subtraction entries is auto-
matically positioned to the 2nd digits from the lowest digits of entry
number.
Use of the
=!
,
{xj and
[4] keys'witl automatically
override the Add Mode and decimally correct answers will be dis-
played.
Ore
ROUNDING
SELECTOR
"4 position:
os Products and quotients are automatically rounded
"5/4" position: AN products and quotients are automatically rounded
off.
"4" position: . Alt figures beyond decimal setting are discarded:
Note:
In addition and subtraction or floating decimal mode, an
answer is rounded down.
CONSTANT
MODE
SELECTOR
"KK" position:
The following constant
functions will be performed.
Multiplication:
The CS-1115/2115 will automatically remember the
first number entered (the multiplicand) and the
[x)
instruction.
Division:
The CS-1115/2115 will automatically remember
the
second number enteréd (the divisor) and the
(F)
instruction.
"e" position:
Neutral
RIGHT
SHIFT
KEY
Operation of this key in entering numbers or calculated result shifts the
number one digit ta the right together with a decimal point. Used for
one digit correction.
ITEM
COUNT
KEY
2
The counter will count the number of times that the
depressed in the addition.
Note:
©
Each time the
©
key is used in the subtraction, 1 will be
subtracted from the count.
When the
ic:
key is pressed once, the number stored is displayed and
may be used for further calculation. To clear the counter, press the [ic]
key twice in succession. The counter has the capacity of a maximum of
3 digits (up to 999).
If the count exceeds 999, the counter recounts
from 0 {Zero}.
key has been
