Idiomas disponibles
Idiomas disponibles
ENGLISH
Press the UP/DOWN buttons to select the desiRed DMX-mode. (1Ch or 10c)
Press the ENTER-button to confirm your choice.
Press the FUNC-button: the 3 digit number on the display starts blinking.
Select the desiRed DMX-address
Press the ENTER-button to confirm your choice.
Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
<daisy chain= your DMX controller and all the connected light effects with a good quality XLR M/F balanced
cable. To prevent strange behavior of the light effects, due to interferences, you must
use a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables,
this simply won't work!
Each effect in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.
1 CHANNEL DMX-CONFIGURATION OF THE LASER:
CHANNEL
CH 1
MODES
10 CHANNEL DMX-CONFIGURATION OF THE LASER:
IMPORTANT REMARK: DMX Channel1 is used to set the different working modes of the laser.
To use the laser in full 10 channel mode, channel 1 must be set to value 175 or higher.
Depending on the DMX-values of channel1, 3 different charts can be applied:
Value between 175 and 199: see chart <10CH DMX-chart 10-A=
Value between 200 and 224: see chart <10CH DMX-chart 10-B=
Value between 225 and 255: see chart <10CH DMX-chart 10-C=
CHANNEL
CH 1
MODES
®
JB SYSTEMS
VALUE
000-024
Laser OFF (Black out)
025-059
AUd mode (Auto grating effects show)
060-099
AUP mode (Auto pattern effects show)
100-139
AUn mode (Auto grating + pattern effects show)
140-179
Sod mode (Sound active grating effects show)
180-219
SoP mode (Sound active pattern effects show)
220-255
Son mode (Sound active grating / pattern effects show)
VALUE
000-024
Laser OFF (Black out)
025-049
AUn mode (Auto grating + pattern effects show)
050-074
Son mode (Sound active grating / pattern effects show)
075-099
AUP mode (Auto pattern effects show)
100-124
SoP mode (Sound active pattern effects show)
125-149
AUd mode (Auto grating effects show)
7/67
USER MANUAL
DESCRIPTION
DESCRIPTION
RADIANT LASER
