SNOWJOE sunjoe 24V-X2-JB500 Manual Del Operador página 7

Sopladora inalambrica a chorro de turbina 48v max. | 140 mph max. | 560 cfm max
Idiomas disponibles

Idiomas disponibles

Unpacking
Carton Contents
• Cordless jet blower body
• Blower tube
• Blower nozzle
• 24V iON+ lithium-ion batteries
• 24V iON+ lithium-ion charger
• Manual with registration card
1. Carefully remove the cordless jet blower and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless jet blower.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Battery Pack Operation
The equipment is powered by two lithium-ion batteries.
The battery packs are completely sealed and maintenance
free.
m
WARNING!
The cordless turbine jet blower can only be
powered by both of the batteries together. One battery cannot
provide sufficient power to the tool. Make sure to use two
batteries of the same voltage and the same capacity. Using the
tool with batteries of different capacity will cause damage to
the batteries.
m
WARNING!
Before first use, the batteries require 55 min
charge time to be fully charged. When the batteries are at low
capacity, recharge for 55 min again before resuming operation.
Battery Charge Level Indicator
The battery packs are equipped with a push button for
checking the charge level. Simply press the push button to
read off the battery charge level from the LEDs of the battery
indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
customer service center at
®
Lights
Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, connect the battery to the charger and charge
as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.
Charger Operation
m
WARNING!
Charge only 24V iON+ lithium-ion battery
packs with their compatible 24V iON+ lithium-ion charger.
Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT
Lithium-Ion Batteries
NOTE: The iON+ 24VBAT lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery packs before placing them into the charger.
• Use the battery charge indicator lights to determine when to
charge your iON+ 24VBAT lithium-ion battery packs.
• You can "top-off" your battery packs' charge before starting
a big job or after a long day of use.
Charging the Batteries
1. Push the push lock buttons on each battery to pull the
battery packs out of the equipment (Fig. 1).
Fig. 1
Push lock
button
Battery
packs
7
Battery
Compartment
loading