Microwave Cooking; Time Cooking; To Set Power Level; Sensor Settings - Gaggenau MW 420 620 Manual De Instrucciones

Microwave cooking

time cooking

Your Microwave Built-in Drawer can be programmed for
99 minutes 99 seconds (99.99). Always enter the seconds
after the minutes, even if they are both zeros.
• To cook for 5 minutes at 100%:
1 Enter cooking time
5 0 0
OR TOUCH POWER
2 To cook at 100% power (High), touch Start (+1 MIn)
pad.

to Set power Level

There are eleven preset power levels.
Using lower power levels increases the cooking time,
which is recommended for foods such as cheese, milk
and long slow cooking of meats. Consult a microwave
cookbook or recipes for specific recommendations.
z z To defrost for 5 minutes at 30%:
1 Enter defrost time 5 0 0
2 Touch poWer LeVeL pad 8 times.
Touch Start (+1 MIn) pad.
3
touch power Level approximate
pad number of percentage
times for Desired
power
POWER LEVEL x 1
POWER LEVEL x 2
POWER LEVEL x 3
POWER LEVEL x 4
POWER LEVEL x 5
POWER LEVEL x 6
POWER LEVEL x 7
POWER LEVEL x 8
POWER LEVEL x 9
POWER LEVEL x 10
POWER LEVEL x 11
.
5.00 TOUCH START
LEVEL
. 5.00
common
Words for
of power power Levels
100% High
90%
80%
70% Medium High
60%
50% Medium
40%
30% Med Low /Defrost
20%
10% Low
0%

Sensor Settings

The sensor is a semi-conductor device that detects the
vapor (moisture and humidity) emitted from the food as it
heats. The sensor adjusts the cooking times and power
levels for various foods and quantities.
using Sensor Settings:
1 After the Microwave Built-in Drawer is plugged in, wait
2 minutes before using any sensor setting.
2 Be sure the exterior of the cooking container and the
interior of the Microwave Built-in Drawer are dry. Wipe
off any moisture with a dry cloth or paper towel.
3 The sensor works with foods at normal storage
temperature. For example, popcorn would be at room
temperature.
4 Any sensor selection can be programmed with More
or Less Time Adjustment. See page 16.
5 More or less food than the quantity listed in the charts
should be cooked following the guidelines in any
microwave cookbook.
6 During the first part of sensor use, the food name
will appear on the display. Do not open the drawer
or touch STOP/CLEAR during this part of the cycle.
The measurement of vapor will be interrupted. If this
occurs, an error message will appear. To continue
cooking, touch the STOP/CLEAR pad and cook
manually.
When the sensor detects the vapor emitted from the
food, the remainder of cooking/reheating time will
appear. The drawer may be opened when the remain-
ing time appears on the display. At this time, you may
stir or season food, as desired.
7 Except for Popcorn, if the sensor does not detect
vapor properly when cooking other foods,
be displayed, and the microwave will turn off.
8 Check food temperature after cooking. If additional
time is needed, continue to cook manually.
9 Each food has a cooking hint. Touch the Settings pad
when the HELP indicator is lighted in the display.
ERROR will
9