Manual Cooking; Factory Settings - Buffalo CF764 Manual De Instrucciones

UK
Operation
Plug power supply cord into power outlet.
1.
After placing the food in a suitable container, open the oven door and put it in the oven.
2.
Shut the door. Make sure that it is firmly closed.
3.
Controls

Manual Cooking

To cook food manually using a specific entered cook time and power level
1.
2.
3.
4.
5.
Note - The user can repeat the last MANUAL COOKING sequence by pressing the START pad within the keypad activating time. After
MANUAL COOKING has ended, opening and closing the door will make the display show cook time and power level setting for the previous
MANUAL COOKING sequence.
Note - The cooling fan may automatically run for a while after cooking to cool the oven.
Preprogrammed Pads
To cook food using number pads preprogrammed with cooking sequences
1.
2.
3.

Factory Settings

Pad Cooking Time
1 10 sec
2 20 sec
3 30 sec
4 45 sec
5 1 min
6 1 min 30 sec
7 2 min
8 3 min
9 4 min
0 5 min
Note - The cooling fan may automatically run for a while after cooking to cool the oven.
5
Open the door and put food in the oven. Close the door. 'HELLO' will show on the display
Press POWER LEVEL pad.
• If 'HI' shows in display, the power level is set to full power
• The % indicator will light if a lower power level is set
• You can change the power level to the desired setting by pressing POWER LEVEL pad repeatedly
Press number pads to enter the cooking time
• Maximum cooking time is factory set to 60 minutes. To Change maximum cooking time see User Options
If multi stage cooking is required, repeat step 2 and 3.
• Display changes to cook time and power level for the next stage
• Up to three different stages can be programmed
Press START pad
• The oven lamp will turn on and cooking will start
• The first STAGE indicator will start to blink and heating time will count down
Open the door and put food in the oven. Close the door. 'HELLO' will show on the display
Press a desired number pad
• For single digit entry, press only one number pad
• For multiple digit entry, press from one to three pads one by one
• Factory setting allows for single digit entry (0-9). To change to multiple digit entry option (0-199) , see user options
Oven begins to cook
• The oven lamp will turn on and cooking will start
• The first STAGE indicator will start to blink and heating time will count down
Power Level
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%