Costway NP10442 Manual Del Usuario página 6

• Do not set up the Bounce on hard-packed earth, asphalt, decking or
any hard surface as doing so may result in physical injury and/or
damage to the Bouncer.
• Once the Bounce inflated or filled with water, do not attempt to drag
it to another location.
• Check your local county or city regulations for requirements on
securing the pool.
Set Up
1
Remove Bouncer
from its packaging
3 4
6
2
Unroll and unfold the
Bouncer in the center of
the designated area.
5
Tie off the short Air Outlet Tube
lightly to make a good seal.
10
INFLATION & STAKING
Secure the bouncer to the ground with the
provided stakes. To prevent tripping, pull the
stake loops all the way out, then drive stakes
completely into the ground.
STORAGE
1 Fold over only 2 Compress air out
and roll up the
product.
REPAIR PATCH INSTRUCTIONS
WARNING: Repair patches must be applied by an adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTION:
1. Deflate the item, clean the area andallow to dry thoroughly.
2. Cut a portion of the patch to the desired size and circle the
corners. ( See Fig )
3. Remove the adhesive backing from the patch material, position
the patch over the damaged area and smooth out any bubbles.
4. Wait 30 minutes before re-inflating.
3
11
EN