Idiomas disponibles
Idiomas disponibles
HOWTO USEYOUR CLEANING SYSTEM
If you haveany probbms operating your pressure washer,
please call the pressure washer heJpfineat 1-800-222-3136,
Pressure Washer Lecation
PressureWasherClearance
WANNING
Exhaustheat/gases can ignite combustibies,
structures or damage fuei tank causing a fire=
• Keepat least5 ft. (152 cm) clearance on all sidesof pressure
washerincluding o verhead.
Mace _ressurewasher outdoors in an area that wiii not
accumulate deadty exhaust gas. DO NOT piace pressure
washer where exhaust gas (A) could accumulate and enter
inside or be drawn into a potentiaily occupied building.
Ensureexhaust gas is kept away from any windows, doors,
ventiiation intakes, or other openings that can aliow exhaust
gas to coiiect in a confined area. Prevaiiingwinds and air
currents should be taken into consideration when positioning
_ressurewasher.
WARNING
Running engine gives off carbon monoxide, an
odorless, coiorbss, poison gas.
Breathingcarbon monoxide can cause headache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death=
* Operate pressure washerONLYoutdoors.
, Keepexhaustgasfrom enteringa confinedareathrough
windows,doors,ventilationintakes, o r otheropenings.
* DONOT stat or run engineindoorsor in an enclosed area,
evenif windowsanddoorsare open.
C_
"I
Te Start Yenr Cleaning System
To start your engine=poweredcleaning system for the first
time, foiiow these instructions step=by=step. T his information
also applies whenever you start the engine after you have let
the pressure wa@er sit idle for at bast a day.
1= Piacepressure washer outside near an water source
capabie of supplying water at a flow rate greater than
3=2galions per minute and no iess than 20 PSi at
pressure washer end of garden hose.
2= Checkthat higil pressure hose is tightly connected to
spray gun and pump. See Assemby for iiiustrations.
3= Make sure unit is in a ievei position=
4= Connectgarden hose to water intet on pressure washer
pump.
5.
Turn ONwater, point gun in a safe direction and squeeze
trigger to purge pump system of air and impurities.
NOTICE
DO NOT run the pump without the water supply connected
and turned on.
_
amageto equipment r esultingfrom failureto followthis
instructionwill void warranty
6.
Piacecolored quick connect spray tips in slots on holder
that's attachedto nozzleextension.
%
7.
Attach nozzleextension to spray gun. Tighten by hand=
8.
Choose spray tip you want to use and insert it into
nozzle extension=See How to Use Spray Tips.
9.
Engagetrigger iock (A) on spray gun trigger.
11
