Adjusting Shoulder Harness Height - UPPAbaby CRUZ 2015 Manual Del Usuario

PUSHCHAIR OPERATION

ADJUSTING SHOULDER HARNESS HEIGHT

STEP 1: Slide harness webbing STEP 2: Detach grey adjustment
through channel to separate fork clip from harness attachment loop.
buckle and webbing.
NOTE: Use loop location above child's shoulder line, or closest to child's shoulder.
CORRECT ATTACHMENT OF ACCESSORIES
Proper Installation of Rain Cover
12
STEP 3: Reattach clip to the desired
harness loop.
Proper Installation of Insect Net
PUSHCHAIR OPERATION
FOLDING THE PUSHCHAIR
NOTE: When folding chassis with seat attached, seat must be in forward facing and upright position.
STEP 1: Activate brake to prevent pushchair from rolling
forward while folding.
STEP 3: Place index fingers on both slide release
triggers and slide upward until chassis begins to fold.
STEP 5: Continue to fold pushchair until latch on left
side has engaged. Pushchair will stand when folded.
STEP 2: Engage button on top of handle bar and extend
to highest position.
NOTE: Handle must be in highest position for pushchair
to stand when folded.
STEP 4: Once pushchair begins to fold, hold handle bar
with right hand and reposition left hand onto back leg.
STEP 6: Use carry grip for easy transport.
13