Husqvarna S 138i Manual De Usuario página 17

Ocultar thumbs Ver también para S 138i:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
Control panel
Error
Error code (Num-
ber of flashes)
Error LED flashes
3
5
9
7
The product stops
6
No flashes.
Other errors
If other errors occur, turn the safety key to 0, remove the battery and speak to an approved
service agent.
Introduction
WARNING:
during transport and storage turn the safety
key to 0, remove the battery and wait a
minimum of 5 seconds.
Transportation
The Dangerous Goods Legislation requirements
apply to the contained Li-ion batteries.
For commercial transports special requirements on
package and labels must be obeyed.
Make sure that you obey the regulations for
dangerous material when you prepare the product
for transport. Local regulations can apply.
Always remove the battery for transport.
Put tape on the battery connectors and make
sure that the battery cannot move around during
transport.
Attach the product during transport.
937 - 008 - 13.11.2023
Possible faults
The motor is overloaded.
The motor speed drops too
much, and the motor stops.
The motor control is too hot.
Battery error or no signal from
battery.
The battery is weak.
The battery is weak.
Battery connector failure.
Transportation, storage and disposal
To prevent accidental start
Possible action
Decrease the work depth. Refer to
set the work depth on page 13 . If the er-
ror LED continues to flash, the dethatch-
er equipment is blocked. To prevent ac-
cidental start turn the safety key to 0, re-
move the battery and wait a minimum 5
seconds. Make sure that the dethatcher
equipment can move freely. If the prob-
lem continues, speak to an authorised
service agent.
Stop the motor and wait until it has be-
come cool.
Put the battery in the product correctly
and examine the battery connector. If the
error LED on the battery flashes, refer to
Battery on page 16 .
Charge the battery. Refer to
the battery on page 14 .
Charge the battery. Refer to
the battery on page 14 .
Examine the battery connector.
Storage
Always remove the batteries for storage.
Let the product become cool before storage.
To prevent accidents, make sure that the battery is
not connected to the product during storage.
Keep the battery charger in a closed and dry space.
Keep the battery and the battery charger in a dry
space where there is no moisture or frost.
Disconnect the battery from the battery charger
during storage.
Do not keep the battery where static electricity can
occur. Do not keep the battery in a metal box.
Keep the product where the ambient temperature is
between -10°C and 40°C.
Keep the battery where the temperature is between
5°C and 25°C and out of sunlight.
Keep the battery charger where the temperature is
between 5°C and 45°C and out of sunlight.
Make sure that the battery is charged to 30% - 50%
before you put it in storage for long periods.
To
To charge
To charge
17
loading