Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
1.-
: on/StandBy amplifier button.
NOTE: the amplifier will switch to StandBy when it detects no signal on its
inputs for 10 minutes. To activate it again you need to press the button
the remote control.
2.- EQ: allows you to select between the following equalisations: FLAT (no
equalisation), ROCK, POP, CLASSIC or JAZZ.
3.- +/-: amplifier volume controls.
4.-
/
: in USB and Bluetooth mode, a short press of these buttons allows you
to select the Previous/Next song that is currently playing. Only in USB mode, a
long press on these buttons allows you to Rewind/Fast Forward the playback.
5.- MODE: press this button successively to switch between modes: Bluetooth,
AUX and USB. USB mode will also be activated when you insert the device
into the USB port.
6.-
: in USB mode, select the repeat mode:
- REPEAT ONE: repeats 1 song.
- REPEAT ALL: repeats everything.
7.-
: turns the audio output on/off.
8.-
: in USB and Bluetooth mode, allows you to start/pause playback. In AUX
mode, turns the audio output on/off.
9.-
PAIR: button for pairing an audio transmitter device via Bluetooth. If it is already paired with another
device, pressing this button will unpair and wait for it to be paired again.
10.-
: in USB mode, select play mode:
- RANDOM ON: plays all songs in random order.
- RANDOM OFF: plays all songs in playback order.
OPERATION
Select the operating mode using the MODE button on the remote control. The speaker will indicate the mode
name by means of a voice-over.
NOTE: the equipment will switch to StandBy when it detects no signal on its inputs for 10 minutes. To
activate it again you need to press the button
BLUETOOTH MODE
- Select BLUETOOTH mode on the KS-12B. The voice-over will say BLUETOOTH MODE.
- Open the Bluetooth settings screen on your smartphone or tablet to pair the KS-12B. Locate and select
the KS-12B device and pair with it. The voice-over will say BLUETOOTH CONNECTED.
NOTE: this amplifier stores the last connected device in memory. You do not need to perform the pairing
process if the same device is connected.
If it is already paired with another device that remains within bluetooth range and you want to unpair it,
press the PAIR button. The KS-12B will unpair the device and wait to be paired again. The voice-over will
say CONNECTING BLUETOOTH.
- Select the music on your smartphone/tablet and start playback.
- Make sure your smartphone/tablet is loud enough to be heard through the speakers. This allows you to
control the volume from the amplifier itself at a later time without having to operate any other equipment.
AUX MODE
- Connect the device via the AUDIO IN (AUX) stereo input and press the MODE button to select AUX mode.
The voice-over will say AUX MODE.
- Activate the audio device (player, mixer, PC, smartphone, etc.) connected to the input and start playback.
- Make sure that the signal from your audio device is loud enough to be heard through the speakers. This
allows you to control the volume from the amplifier itself at a later time without having to operate any other
equipment.
on the remote control.
- 3 -
on
7
EQ
8
4
9
PAIR
10
EN
1
2
3
4
3
5
6
