Idiomas disponibles
Idiomas disponibles
flashing 4 times, then press the setting button ⑤ (on the microphone)
once. The microphone screen becomes steady and no longer flashes,
the signal light on the receiver turns steady, indicating that the pairing
is successful.
5. Tighten the microphone tail tube. Pairing is now completed.
No sound for TW525 (The batteries of microphone have already
been installed, but one of the microphone has on sound.)
Wireless Microphone ID Pairing Steps:
1. Make sure that the receiver and microphone are turned OFF.
2. Unscrew the microphone tail tube and install the batteries into the
mic's battery compartment.
3. Turn on the microphone, and press setting button ⑤ (on the
microphone), until the microphone screen flashes quickly, then release
settting buttons.
4. Turn on the receiver's power button, waiting for signal light flashing
4 times( red light for A mic and green light for B mic), then press the
setting button ⑤ (on the microphone) once. The microphone screen
becomes steady and no longer flashes, the signal light on the receiver
turns steady, indicating that the pairing is successful.
5. Tighten the microphone tail tube.
6. Pairing is now completed for one mic, then repeat 2-5 steps for
another mic pairing.
Received signal with noise or interference
Change to other channels;
Check if receiving distance exceeds the maximum range.
Microphone cannot be turned on
Check if batteries are installed reversely;
Change to new batteries.
WARRANTY
TONOR provides 2 years of after-sales service, free replace-
ment to products that are NOT damaged resulting from
accident, alteration, misuse, negligence, or abuse. If exceeding
30 days of Amazon return policy, you can still contact us
through our Shopify TONORMIC. We will serve you with full
sincerity!
06
