Tascam BD-MP1 MK II Manual Del Usuario página 17

Settings
On the Settings screens, which include the General Settings, Display Settings, Audio Settings and System Information screens, settings
can be made and information checked, for example.
While the Settings icon is selected, press the ENTER button to show icons for the various settings.
To move between menus, confirm settings and execute items, use the shift* functions of buttons on the unit or use the cursor and ENTER
buttons on the remote control. (These explanations will primarily use remote control operations.)
* To move the cursor, confirm settings and execute items using the unit, press the HIDE/MENU [SHIFT] button and the button with that function (shown below the button in
a white rectangle with black characters) at the same time.
Basic remote control functions
o To exit a folder or subfolder, press the l cursor button repeatedly to return to the starting screen.
o Press the HOME button to return to the HOME screen.
o Press the RETURN button even during an operation to return to the previous screen.
o In the list of settings below, the underlined setting items are the defaults.
o Unless specifically noted, items set on Setting screens are retained even when the power is turned off.
General Settings
System
Function
Screen Saver
Remote control code
HDMI CEC
Disc Auto Upgrade
Load Default
Options
On, Off
RC-BDMP1MKII, RC-BDMP1
On, Off
On, Off
More...
Explanation
Turn the screen saver on/off.
If "On" is selected, the following functions become enabled when
nothing is playing back or when playback is stopped or paused.
o A screensaver will appear after about 3 minutes without operation.
o The unit will automatically turn off after about 10 minutes with-
out operation.
In addition to the included remote control, TASCAM RC-BDMP1
remote controls (sold separately) for the BD-MP1 can also be used.
o To change the setting, the remote control to be used after the
change is necessary.
RC-BDMP1MKII
Select this to use an RC-BDMP1MKII.
RC-BDMP1
Select this to use an RC-BDMP1 (sold separately).
NOTE
If a remote control that is different from the current settings is
selected and the ENTER button is pressed, the remote control
settings screen will open. Operate the selected remote control to
select OK and press the ENTER button to switch the remote control
code. To cancel the change, operate the selected remote control
to select "Cancel" and press the ENTER button, or wait 15 seconds
without doing anything.
When an HDMI cable is used to connect a device such as this unit
that supports HDMI CEC to a TV that supports HDMI CEC, this func-
tion allows the remote control to link operation of both of them.
(When off, only the unit will respond to the remote control.)
If an upgrade disc is loaded into this unit, upgrading will occur
automatically.
This function restores the various settings stored in the backup
memory of the unit to their factory default values.
17
TASCAM BD-MP1MKII