Idiomas disponibles
Idiomas disponibles
USB port
q
Connect/disconnect USB flash drives here.
Audio, video and other files can be played back from a con-
nected USB flash drive. Moreover, this can be used to load
update files for firmware updates.
Rear panel
e
ANALOG OUT (BALANCED) L/R jacks
e
These are balanced XLR analog output jacks.
These transmit balanced 7.1CH OUT FL/FR audio signals to
external speakers and amplifiers, for example. Use XLR cables
for connection.
NOTE
If you want to use downmixed audio when the selected
speaker settings channel configuration is not 2.x, use digital
signals from the DIGITAL OUT (COAXIAL) connector.
ANALOG OUT (UNBALANCED) L/R jacks
r
These are unbalanced RCA analog output jacks.
These transmit the same audio signals as output from the
7.1CH OUT FL/FR connectors to external speakers and amplifi-
ers, for example. Use RCA cables for connection.
NOTE
If you want to use downmixed audio when the selected
speaker settings channel configuration is not 2.x, use digital
signals from the DIGITAL OUT (COAXIAL) connector.
7.1CH OUT (unbalanced) connectors
t
These are 7.1 unbalanced RCA analog output jacks.
These transmit 8 channels of audio signals to a 7.1 surround
system. Use RCA cables for connection.
DIGITAL OUT (COAXIAL) connector
y
This is a coaxial digital audio output connector.
This transmits digital audio signals to a television. Use a coax-
ial cable (75Ω) for connection.
The maximum channel count for this connector is 5.1.
HDMI OUT port
u
Audio/video signals are transmitted from the HDMI port. Use
an HDMI cable for connection.
NOTE
Audio can be output from the ANALOG OUT jacks, the 7.1CH
OUT jacks, the HDMI OUT connector and the DIGITAL OUT
(COAXIAL) at the same time.
USB port
i
Connect/disconnect USB flash drives here.
Audio, video and other files can be played back from a con-
nected USB flash drive. Moreover, this can be used to load
update files for firmware updates.
Ethernet connector
o
This is an Ethernet port.
Use to connect this unit to a network and to control it from a
computer.
Moreover, BD-Live contents can also be accessed with an
Internet connection. Use an STP cable that is category 5e or
higher for connection.
12
TASCAM BD-MP1MKII
r
t
SD card slot
w
Insert an SD card in this slot.
Audio, video and other files can be played back from a con-
nected SD card.
y u
i o
RS-232C connector
p
This is a 9-pin D-sub RS-232C control input/output connector.
A computer can be used to control this unit by connecting to
it with an RS-232C cable.
AC IN connector
a
Connect the included power cord here.
p
a
