Cadwell Sleepmate Manual De Instrucciones página 5

Technical Specifications
The snoring microphone and snoring sensor will work on virtually all standard physiographs
or computer recording equipment.
Description
Lead wire
Connectors
Microphone:
Sensitivity level
Filter settings
Microphone dimensions
Sensor:
Filter Settings
Signal Output
Output Impedance
Sensor Dimensions
Caution Statement:
US Federal Law restricts this device to sale by or on the order of a physician. This product is for diagnostic
purposes only and is not intended to be used as an apnea monitor or in a life supporting or sustaining
capacity
Properties
Two conductor white, approx. 200 cm (80'').
1.5 mm (0.1'') safety pins or special connectors such as a Lemo on some
models.
2 - 75 µV / mm
High Pass 70 Hz or 120 Hz, Low pass 5 Hz or 0.03 sec
Round disc diameter = 16 mm (0.6'')
High Pass: 50 Hz; Low Pass: 250 Hz.
Approx. 1 mV for loud snoring
50 kΩ
Round flexible silicon rubber disc
(diameter = 20 mm; thickness = 5 mm)
5