Idiomas disponibles
Idiomas disponibles
Functional
Description
Figure 1: Cordless Drill
A – Chuck
B – Gear Shifter
C – Torque Adjusting Ring
D – Forward/Reverse Switch
E – Trigger
F – Auxiliary Handle
G – Release Button
H – Battery Pack
I – Application Selector Ring
Specifications
Drill Specifi cations
Motor Voltage ...........................................18 VDC
Chuck Capacity (keyless) ................ 1/2" (13 mm)
Stall Torque ......................... 450 in. lb. (50.9 N•m)
Free Speed Low (1) ............................ 0–500 RPM
Free Speed High (2) ......................... 0–1800 RPM
Blows per Minute Low (1) ............................8,000
Blows per Minute High (2)..........................28,800
Weight with Battery Pack ........... 5.25 lbs. (2.0 kg)
Length .........................................10.0" (39.4 cm)
Height .......................................10.35" (40.7 cm)
Operating Temperature
................................. -4°F(-20°C) to 140°F(60°C)
Noise* (Tested in accordance with EN 60745)
Sound Pressure Level (A) .......................78.9 dB
Uncertainty, K ...........................................3.0 dB
Sound Power Level (A) ...........................90.5 dB
Uncertainty, K ...........................................3.0 dB
Vibration* (Tested in accordance with EN 60745)
Vibration Level .................................... .. 2.5 m/s
Uncertainty, K ........................................0.5 m/s
*These declared values were obtained by
laboratory type testing with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
ZCDR8850HCE Rev. D
higher. Values and risk of harm experienced by an
individual user are unique and depend upon the
environment and manner in which the user works,
the work piece and the workstation design, as well
as upon the exposure time and the physical
condition of the user.
We, Snap-on Tools Company, cannot be held liable
for the consequences of using the declared values,
instead of values reflecting the actual exposure
determined in an individual risk assessment in a
work place situation over which we have no control.
Symbology
SYMBOLOGY
n
xxx/min
0
2
2
BC
7
READ INSTRUCTIONS
WEAR EYE PROTECTION
WEAR HEARING PROTECTION
VIBRATION HAZARD
VOLTS
DIRECT CURRENT
NO-LOAD SPEED
CE MARK
CANADIAN - UNITED STATES
UNDERWRITERS LABORATORY
PROPERLY RECYCLE BATTERY
DO NOT THROW IN GARBAGE
CALIFORNIA -
TITLE 20 COMPLIANT
(01/16)
