Loading Nails; Nailer Operation - Metabo HPT NT 1850DG Manual

English
– THE NAILER MUST OPERATE PROPERLY.

LOADING NAILS

WARNING
When loading nails into Nailer,
1) remove battery from the nailer;
2) do not pull trigger;
3) do not depress push lever; and
4) keep nailer pointed downward.
1. Lightly press the stop lever and gently pull out the
magazine cover.
Magazine cover
2. Set nail strip into the magazine and keep the points of
nails in contact with Groove.
Nails strip
○ The nails shown in page 12 can be loaded onto the
side guide groove of the magazine without any
adjustment.
Always keep the points of nails in contact with
Groove.
18
Press
Stop lever
Pull out
Groove
Magazine
Magazine
Side guide
groove
Nail
Groove
3. Slide the nail strip into the blade guide.
Blade guide
4. Confirm that nail strip is placed with side guide
grooves and Groove properly, then push the
magazine cover forward to be latched.

NAILER OPERATION

Read section titled "SAFETY" (pages 2–9).
DANGER
Operators and others in work area MUST wear
safety glasses with side shields which conforms
to ANSI Z87.1 specifications.
WARNING
● NEVER point tool at yourself or others in work
area.
Gap
Nails strip