Idiomas disponibles
Idiomas disponibles
Service button functions
Operation
Press and hold for 5 seconds until
the green LED begins to flash.
Press and hold for 15 seconds until
the yellow LED begins to flash.
Installation
Place the Aquarium Controller at a protected, dry location, for example in the cabinet below an
OASE aquarium.
Connection
Connect the system as shown in the system overview. (→ System overview)
Establishing the plug connection
Description
Reset network settings.
• When the button is released, the green LED extinguishes and the
yellow LED lights up for approx. 5 seconds. Then the yellow LED ex-
tinguishes and the green LED lights up.
• The network settings are reset to the delivery default settings.
• All other settings are maintained (e.g. device list and device set-
tings).
Reset to factory settings.
• When the button is released, the green LED extinguishes and the
yellow LED lights up for approx. 10 seconds. Then the yellow LED ex-
tinguishes and the green LED lights up.
• All settings are reset to the delivery default settings.
Disconnecting the plug connection
EN
15
