cecotec CREMMAET MACCHIA Manual De Instrucciones página 50

ENGLISH
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
Cremmaet Macchia superautomatic coffee machine (in any of its designs)
-
Instruction manual
-
3. OPERATION
To prepare the coffee machine before the first use, follow the instructions below:
1. Water tank
Fill the water tank with distilled water up until the Max mark and place it back in the machine.
Make sure it is in the correct position.
2. Grind setting knob
Turn the grind setting knob to the left.
-
Turn the grind setting knob clockwise.
-
NOTE: when using the machine for the first time, set the grind setting to a level higher than 8.
The adjustable grinding levels range from 1 (finest) to 15 (coarsest). The number of the arrow
on the grind level icon corresponds to the selected grind level.
WARNING: it is suggested not to adjust several levels at the same time to avoid causing
damage. Never adjust the grinding level when the grinder is not in operation, as this could
damage the grinder.
3. Adjust the coffee spout to the desired height
The height of the coffee spout can be adjusted between 85 and 115 mm, depending on the
cup to be used, so you will have to adjust it. All you have to do is raise or lower it by exerting a
little force.
4. Coffee machine
Open the panel and check that the brewing unit is properly installed in its position.
-
Check if the arrow on the brewing unit is aligned with the arrow on the upper bracket. If
-
you hear a click when removing and reassembling it, this indicates that the brewing unit
is correctly assembled.
50