Kenmore ELITE 596.76522500 Guía De Uso Y Cuidado página 17

Fresh F ood Feutures
Shelves
To avoid personal injury or property damage,
observe the following:
• Never attempt to adjust a shelf that is loaded with
food.
• Confirm shelf is secure before placing items on
shelf.
• Handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
Your refrigerator has spillproof glass shelves. The
spillproof shelves have a spill retainer edge which
allows for easier clean up and are equipped with a
slide-out feature.
To slide the shelf out, grasp the front of the shelf and
pull forward. Push in the shelf to return to the original
position.
To Remove a Shelf: _ _
• Slightly tilt up the front and lift up
the rear of the shelf, then pull the
shelf straight out.
To Lock the Shelf Into Another Position:
• Tilt up the front edge of the shelf.
• Insert the hook into the desired frame openings and
let the shelf settle into place.
• Be sure the shelf is securely locked at the rear.
The Crisper Top serves as the lower fresh food shelf.
To Remove the Crisper Top:
• Place hand under the frame to push up the glass. Lift
glass out.
• Lift frame from refrigerator liner rails.
To Install:
• Replace frame in refrigerator liner rails.
• Carefully replace glass into frame.
Door Storage
Dairy Center
The Dairy Center provides
convenient door storage for
spreadable items such as butter
and margarine. This compartment can be moved to
different locations to accommodate storage needs. To
use the dairy center, raise the cover.
To Remove:
• Raise the cover, pull upward and tilt out.
To Install:
• Slide the Dairy Center in and down until
firmly seated in the door liner.
Door Buckets
Door Buckets can be moved to
meet storage needs.
To Remove:
• Slide bucket up and pull straight out.
To Install:
• Slide bucket in and down until firmly seated in the
door liner.
Adjustable Tilt-Out Door Buckets
The Adjustable Tilt-Out Door Bucket provides easy
access to food items stored in the door.
To Remove Bucket:
• Tilt bucket out.
• Pull straight out of the bracket.
To Install Bucket:
• Tilt the front of the bucket down slightly.
• Slide into bracket and tip upright.
To Move Bucket Frame to Another Location:
• Remove bucket.
• out.Lift bracket up and pull straight
Place the bracket in a new
location.
17