Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
VFL3-VO24DR / VFL3-RO24DRL / VFL3-VO30DR
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this heater may result in property damage or personal injury.
WARNING: All previously applied loose material must be removed prior to reapplication
CAUTION: After installation and periodically thereafter, check to ensure that no yellow flame comes in
contact with any log. With the heater set to High, check to see if yellow flames contact any log. If so,
reposition logs according to the log installation instructions in this manual. Yellow flames contacting
logs will create soot.
It is very important to install the logs exactly
as instructed. Do not modify logs; use only logs
supplied with heater. Each log is marked with a
number, and this number will help you identify
each log during installation.
1. Insert log #1 onto pins in middle grate base.
2. Place log #2 & #3 onto the front grate. Make sure
the recessed areas on the log match up with the
grate, and the inside end of each log is centered on
grate.
Provided Logs: 8
1
2
1
2
3
22
3
4
5
6
7
8
1
2
