Idiomas disponibles
Idiomas disponibles
Preparing
the Blender for Use
8.
Before removing
the pitcher from the
base, always press OFF and unplug
the
power
cord. Lift the pitcher assembly
in a straight,
upward
motion
off of the
Blender base.
Fire Hazard
Do not use an extension cord.
Doing so can result in death
or fire.
7.
Plug power
cord into a grounded
2-prong
polarized
outlet.
Blender is
now ready for operation.
Using the Blender
Before
Use
NOTE: When the Blender is on, the CHOP
ICE indicator
light is lit.
- Do not interfere with
blade movement
- Do not remove pitcher
lid
Operating
the Blender
The KitchenAid ® Blender has three speeds:
HIGH, MEDIUM
and LOW and also has a
SMOOTHIE
feature
and CHOP ICE feature.
°
_iiiiii!
1. With convenient
one-step
operation,
this Blender only operates
when a
speed selection
button
is pressed.
2. Before operating
the Blender, make
sure the pitcher is properly
secured
in the locking
collar and assembly
is
positioned
on the Blender base.
Gap
i!i!
NOTE:
If a gap exists between
the locking
collar and the base, the pitcher
might
not
be locked into the locking
collar or the
pitcher
assembly
is not positioned
properly
on the Blender base. See Blender Assembly
for further
instructions.
3. Put ingredients
into the pitcher and
firmly attach
lid.
4. Press the desired speed button
for
continuous
operation
at that speed.
The red indicator
light by the selected
speed will stay lit. You may change
speeds without
stopping
the unit by
pressing
a new speed button.
IMPORTANT:
If blending
hot foods or
liquids,
remove the center
ingredient
cup.
Operate
only on LOW speed.
5. To turn off the Blender, press OFE The
OFF button
will stop any speed and
deactivate the Blender at the same time.
6. Before removing
the pitcher unplug
the
power
cord.
Continued
on next page
