Idiomas disponibles
Idiomas disponibles
Safety Instructions
When maintaining and cleaning, disassemble the fan base before
removing other parts. Make sure you install the fan base last
when assembling the fan.
Under normal use of condition, this equipment should be kept a
separation distance of at least 20cm between the antenna and
the body of the user.
Ensure that the fan is switched off from the supply mains
before removing the guard.
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer or
its service agent.
Do not strike, crush, and drop the product, or expose it to pressure.
Keep the product away from water and heat sources.
Do not use this product in environments where the temperatures
and humidity are extremely high. Avoid direct sunlight.
Read this manual carefully before use, and retain it for future reference.
PRECAUTIONS
Installation
To avoid electric shocks, fire, personal injury, or other damage,
please strictly follow the installation steps instructed by the user
manual, and make sure the fan base is assembled in the last step.
Do not connect the fan to the electrical outlet until it is fully assembled.
Transportation
Turn off and unplug the fan before moving it.
Firmly hold the fan stand to avoid it from falling down and causing
personal injury.
Using the Fan
Immediately stop using the fan if it makes unusual sounds, gives
off bad odors, overheats, or rotates irregularly.
Do not lean on or tilt the fan while it is running.
Do not shake the fan's head repeatedly so as to avoid damage to the
internal mechanism.
Power Cord
Disconnect the fan from the electrical outlet before doing
maintenance or moving it.
Always unplug the fan by pulling the power plug rather than the cord.
When the power cord is damaged, it must be replaced with a genuine
one purchased from the manufacturer or a er-sales service department.
2
