− The appliance must be powered by means of a residual
current device with a rated residual operating current
of 30 mA or below.
− When using an extension cord, it must be unwound
fully to prevent the cable from overheating. Ensure the
socket is not overloaded (check the wattage of the
appliance).
− To guard against electric shocks, do not immerse the
lead, connector or body of the appliance in water or
any other liquid. Do not handle with wet hands.
− Do not leave the lead hanging from a table or counter.
− Do not place the appliance and its lead on or near a
surface which is likely to become hot (cooking plate,
gas burner, oven, etc.).
− Place the appliance on a stable and dry surface, slightly
away from the edge and further than 20 cm away from
any wall and heat-sensitive element.
− Do not cover the vents, otherwise you may trigger the
thermal protection system due to the product
overheating internally.
− Warning: do not use this appliance with charcoal or an
energy source other than the one it was designed for
(electric power).
− Disconnect the plug when the appliance is not in use or
before cleaning it.
- 16 -