Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONVERSION
INSTRUCTIONS
Searing
Burner Conversion
1.
Remove
screws at the back of searing
burner to detach it from bracket. Then lift
the burner while sliding it out of firebox.
(Fig. 7)
,
Insert the provided
orifice removal tool (B)
into the burner opening and unscrew
orifice from end of valve.(Fig.8)
Orifice
Fig. 8
,
Put the new orifice into the orifice removal
tool (B), and then insert the tool into the
burner opening and tighten the new orifice
to the valve.
Make sure you are using
the correct
orifice,
which
is marked
"1.44".
(Fig. 9)
,
Replace
burner and screws. Make sure to
engage the tube over valve as shown.
(Fig. 10)
7
The sear burner
Fig. 10
Tabla de contenido
