Kenmore 10478 Manual De Uso página 6

CONVERSION
INSTRUCTIONS
,
Insert the provided orifice removal tool (B)
into burner openings and unscrew orifices
from ends of valves. (Fig. 3)
Orifice
Fig. 3
,
Put the new orifice into the orifice removal
tool (B), and then insert the tool into the
burner opening and tighten the new orifice
into the valve. Repeat this step for all three
burners.
Make sure you are using the correct
orifice, which is marked "1.37". (Fig. 4)
,
Rotate the air shutter opening from the LP
setting to the NG setting.
LP: 1/4" open
NG: 1/6" to 1/8" open (Fig. 5)
I
Air shutter opening to adjust I
Fig. 5
,
Replace burner tube and pins. Make sure
to engage the burner valves as shown.
(Fig. 6)
The main burner
Fig.6
6