Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONVERSION
INSTRUCTIONS
.
Tighten the new orifice to the valve.
Make sure you are using
the correct
orifice,
marked
"1.37".
(Fig. 33)
!/...........................................................................
1.37
Fig. 33
Rear Burner
Conversion
1. Remove 5 screws (3/16-24
X 1/2 in.) at the
back of burner box to detach the rear burner
cover from the rear panel of burner box.
During
this process,
hold the rear burner
cover,
otherwise,
it will drop and may
break,
possibly
causing
injury.
(Fig. 34)
Rear burner
cover
Fig. 34
2.
Use wrench
to remove rear burner orifice
from the rear burner and the hose. (Fig. 35)
Orifice
Fig. 35
16
Tabla de contenido
