Water Fill
WARNING: TTo reduce the risk of
shock, always unplug humidifier
before cteaning or servicing.
Bottte ,,
\
WARNING: To reduce the risk of fire
or shock hazard, do not pour or spill
water into control or motor area.
If controls get wet, let them dry
completely and have unit checked by
authorized service personnel before
pluggingin.
-Base
This humidifier is designed for use with
the water bottle located to the ring of the
upper grill. The water bottle holds 1.9
gallons of water. The humidifier should be
positioned where it will be operating.
To filI the whole house humidifier, grasp
the bottle handle at the top of the bottle
and lift it straight up and away from the
humidifier base. Take care not to bump or
damage filI valve assembly on the bottom
of the bottle.
NOTE; If it is desired to use approved
bacteriostat, follow directions correctly.
The bottle of the whole house humidifier
will hold 1.9 gallons of water.
The water bottle is designed with an "E-Z
FilI Side Cap". Remove the "E-Z-Fill Side-
Cap" on the side of the water bottle by
twisting counterclockwise.
Place the opening of the water bottle
under a water faucet and fill. If desired,
add Sears liquid bacteriostat (Stock
Number 32-14900) to help control the
build up of bacteria and algae. Do not
use solid water treatments. Solid debris
could make the lower valve leak.
Install the "E-Z-Fill Side-Cap" by twisting
clockwise. Hand tighten only.
CAUTION:
Use only 32-14900 EPA
Registered Bacteriostat available
from Sears Retail store. Under no
circumstances
should you use water
treatment products designed for
Roto belt or Ultrasonic humidifiers.
z/
Spring Valve
Aesembmy
Turn Counterclockwise
to
Remove "E-Z Fill Side Cap"
f
//
/