Idiomas disponibles
Idiomas disponibles
How Your Humidifier
Works
Your new Kenmore humidifier is designed
to satisfy home humidity requirements
through the principle of evaporation of
water in the air.
After water is added to the bottle, the
filters begin to soak up the water and
become totally saturated in approxi-
mately 30 minutes. Air is drawn in from
the rear of the humidifier and through the
filters by means of circulation fans. As air
passes through the filters, moisture is
absorbed into the air and then released
in the form of vapor. No water droplets
will enter the home. AII evaporation into
the air takes place in the humidifier,
which means that the residue left by
evaporating water is not passed into the
home, but remains in the filter.
This natural process of evaporation helps
eliminate the change of white dust in the
humidified output air.
CAUTION:
Use only 32-14900 EPA
Registered Bacteriostat available
from Sears Retail store. Under no
circumstances
should you use water
treatment products designed for
Rote belt or Ultrasonic humidifiers.
Humidified
air is
then reteased
throug
Dry air
enters
through
the
Jouvers
in the
housing
CAUTION:
To reduce the risk of
iniury, fire or damage to humidifier,
use only cleaners specifically
recommended
for humidifiers. Never
use flammable,
combustible or
poisonous materials to clean your
humidifier. To reduce the risk of
scalds and damage to humidifier,
never put hot water in humidifier.
Assembly
Carefully remove the humidifier and all
other contents from the carton.
There is a black strip that contains six
pads for the bottom of the humidifier.
Remove each pad and place one on
each of the six legs on the bottom of the
base as shown, by the solid dots.
Once installed return the humidifier to it's
originaI state and proceed to "Location
instructions".
