English
Battery precautions
1. Do not use rechargeable batteries.
2. Use only alkaline AA batteries of the same or equivalent type.
3. Insert batteries with the correct polarity
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal
requirements. Do not dispose of them by throwing away with
normal household rubbish.
6. Avoid short circuiting the contacts in the battery compartment
and battery terminals.
7. Remove batteries from the unit if it will not be used for a long
period of time.
8. Exhausted batteries should be removed from the battery
compartment to prevent over-discharging, which can cause
leakage and may cause damage to the clock.
Battery installation
1. Insert 3xAA (1.5V) batteries observing the correct polarity, as
shown on the diagram.
2. Replace battery cover.
Time setting
Turn the TIME SET knob on the back of the clock in the direction of
the arrow until correct time is shown. Only turn in the direction of
the arrow to avoid damaging the movement.
Alarm setting
Turn the ALARM SET knob on the back of the clock in the direction
of the arrow until the desired alarm time is shown. Only turn in the
direction of the arrow to avoid damaging the movement.
Alarm function
To set the alarm, move the slider on the right side of the clock
upwards. The alarm is set when the green colour indicator is
visible. To unset the alarm, move the slider on the right side of the
clock downwards.
Snooze function
When the alarm is sounding, push the button at the top of the
clock and the SNOOZE/LIGHT function will be activated. The
alarm will be stopped and will sound again after ~5 minutes.
Backlight function
Anytime, push the button at the top of the clock and the backlight
function will be activated. The dial will be illuminated for ~5
seconds.
Continuous backlight function
To activate the continuous backlight function, move the slider
on the back side of the clock to the 'on' position. When the
clock is placed in a dark environment, a subtle backlight effect
will automatically be activated to aid legibility. To disable the
continuous backlight function, move the slider on the back side of
the clock to the 'off' position.
Note: The backlight will only turn on in low-light conditions, such
as in a dark room. If this feature is used continuously, the battery
life will be greatly reduced.
Guarantee
2 year guarantee against material and workmanship defects
(except battery). The guarantee is valid in those countries where
the alarm clock is officially being sold.
Broken or cracked lens screens are not covered under the
Guarantee.
Braun helpline
Should you have a problem with your product, please check your
local service centre at:
www.braun-clocks.com
www.braun-watches.com
or contact +44 808 175 3235 (calls free within the UK)
or +44 208 208 1833.
WARNING! This product is covered by the Waste Electrical and
Electronic Equipment (WEEE) directive. It should not be discarded
with normal household waste but taken to your local collection
centre for recycling.
This product conforms to the EMC requirements as per council
directive 2014/30/EU.
Certain trademarks used under license from the Procter & Gam-
ble Company or its affiliates.
