Idiomas disponibles
Idiomas disponibles
2.Install front wheel and rear wheel
Install front wheel:
①
1) Align the front wheel shaft with the car body screw hole, fix it by 8 pieces
4*12 flat head screws.
2) Put one M10 washer on the front wheel shaft on both sides. Put one shaft
bushing (Black plastic) into two wheels respectively, and then install these
two wheels on the front wheel shaft respectively. Then place one M10
washer on each side of two front wheels, and use anti-loose nuts to fix
finally. Press the wheel cover on the wheel.
08
10
② Install rear wheel:
1）First align the rear wheel drive plum blossom with the screw hole of
wheel,use three 4*12 round head (NO.23)screws to fix (total installed two
wheels according to these steps)
2）Place two shock proof springs and two shock proof plastic parts into the
groove of car body. Use eight built-in 4*12 flat head screws to fix the
shook-proof iron sheet. Then align the rear wheel shaft with car body and
pass through the hole at both sides.
EN
09
