Idiomas disponibles
Idiomas disponibles
10
English
Care and maintenance
Clean and disinfect the accelerator light after each whitening session.
-
-
-
-
-
-
Storage
The boom is designed to fold down to minimize the overall accelerator light footprint for convenient storage or
to move the device. To do so, loosen the boom knobs and fold the boom down and in towards the stand.
Fuse replacement
CAUTION: Unplug the accelerator light from the power outlet before replacing fuses.
1 Use a Phillips-head screwdriver to remove the screw at the bottom of the power pack housing. Set the screw aside
2 Remove the door from the housing.
3 Pull the white power cord from its connection and let it hang freely.
4 Look for the fuse label near the upper right-hand side to identify the fuse location.
5 Using a small thin-bladed flathead screwdriver, pry open the right-hand side of the fuse door.
6 Using a small thin-bladed flathead screwdriver, pry out the red fuse rack.
7 Remove both fuses from the red fuse rack - note their location in the fuse rack.
8 Snap in the new fuses at the top of the fuse rack. They should be closer to the side with the tabs (top).
9 Reinsert the fuse rack into the fuse slot with the tabs first. Push the fuse rack in until it is securely in place.
10 Close the fuse door.
11 Reinsert the power cord firmly into the power pack housing.
12 Reinsert the screw into the door and tighten with a Phillips-head screwdriver.
ZOOM_3000.040.0114.3_BOOKLET-lux_US-letter_FC.indd 10
ZOOM_3000.040.0114.3_BOOKLET-lux_US-letter_FC.indd 10
Do not spray or pour liquids directly onto the system.
Apply cleaners to a soft cloth or paper towel before using.
Do not use abrasive cleaners or solvents.
The following cleaners are recommended: Sanicloth, CaviWipes, SciCan, Birex, BioSurf, Cidex and IPA.
Follow the instructions of the cleaning products to ensure proper cleaning of the unit.
For optimum performance, make sure that the output window on the head remains clean and free of
particles or streaks.
The accelerator light has no user-serviceable or user-replaceable parts with the exception of two replaceable
fuses that are inside the power pack housing.
for reassembly.
Note: You will not be able to close the fuse door if the fuse rack is not inserted correctly.
07-05-21 09:39
07-05-21 09:39
