Omron HCG-801 Manual De Instrucciones página 51

Ocultar thumbs Ver también para HCG-801:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MESSAGE
Storing on SD memory.
DO NOT REMOVE SD
Copying SD memory.
DO NOT REMOVE SD
Data in device memory is being
erased.
Data in SD is being erased.
DO NOT REMOVE SD until
erasing finishes.
Reading data...
DO NOT REMOVE SD.
No SD is inserted.
SD is write-protected.
No saved data.
MESSAGES
CAUSE
ECG data is being written
(saved) to the SD memory card.
ECG data is being copied to the
SD memory card.
ECG data stored on the unit is
being erased.
ECG data stored on the SD
memory card is being erased.
The unit is loading ECG data
stored on the SD memory card.
There is no SD memory card in
the card slot.
The unit is unable to access data
because the SD memory card
inserted is write-protected.
The battery power has run low
and the ECG data stored on the
unit has disappeared.
51
CORRECTION
Wait until the message disappears.
Do not remove the SD memory card
until data storage has been
completed.
Wait until the message disappears.
Do not remove the SD memory card
until data copying has been
completed.
Wait until the message disappears.
Wait until the message disappears.
Do not remove the SD memory card
until data erasing has been
completed.
Wait until the message disappears.
Do not remove the SD memory card
until the data has been loaded by the
unit.
Turn off the power and insert the SD
memory card.
Never insert the SD memory card
while the power is turned on.
Refer to the instruction supplied with
the memory card and insert the SD
memory card with write-protection
turned off.
Insert new batteries. Reset the Date
and Time and other settings. Any
ECG data that was stored on the unit
cannot be recovered.

Capítulos

Tabla de contenido
loading

Tabla de contenido