Even tires equipped with built-in flat-preventative tire liners can and do get flats from
punctures, pinches, impact, and other causes. When tire wear becomes evident or a flat
tire is discovered, you must replace the tires and/or tubes before operating the bike or
injury to operators and/or damage to your bike could occur.
When changing a tire or tube, ensure that all air pressure has been removed from the
inner tube prior to removing the tire from the rim. Failure to remove all air pressure from
the inner tube could result in serious injury.
STORAGE INSTRUCTION
If storing your bike for longer than 2 weeks at a time, follow the instructions below to maintain the health
and longevity of your battery.
Charge(or discharge) the battery to approximately 75% charged.
DO NOT leave the battery attached to the bike frame. Remove it from the bike during long-term
storage.
Store the battery in a dry, climate controlled, indoor location between 0℃– 40℃ (32℉–104℉).
Check the battery every month to 75% charged.
If stored for a long time, keep the battery cool and dry, and charge the battery for 2 hours every
other 3 months.
Failure to follow proper battery storage procedures can result in a non-functional
battery. Replacement will not be covered under warranty.
DO NOT cover up the charger while it is charging. The charger air cools and needs to be
on a hard, flat surface in an open space. Use the charger with the indicator lights facing
upward.
DO NOT open the battery housing, which will void the warranty and can result in
damage to the battery, property or cause serious injury and/or death.
EN
14