Idiomas disponibles
Idiomas disponibles
WARNING:
TO REDUCE
THE RISK OF FIRE OR ELECTRIC
SHOCK,
DO NOT EXPOSE
THIS APPLI-
ANCE TO RAIN OR MOISTURE.
CAUTION
CAUTION:
TO
REDUCE
THE
RISK
OF ELECTRIC
SHOCK,
DO NOT REMOVE
COVER
(OR BACK)
NO
USER
SERVICEABLE
PARTS
INSIDE.
REFER
SER-
VICING
TO QUALIFIED
SERVICE
PERSONNEL.
The
important
note Is located
on the rear of the cabineL
THIS
SYMBOL
INDICATF_
THAT
DAN-
GEROUS
VOLTAGE
CONSTI-TUTING
A
RISK
OF ELECTRIC
SHOCK
IS PRE-
SENT
WITHIN
THIS
UNIT.
THIS
SYMBOL
INDICATES
THAT
THERE
ARE IMPORTANT
OPERATING
AND
MAINTENANCE
INSTRUCTIONS
IN THE
LITERATURE
ACCOMPANY-ING
THE
APPLIANCE.
IMPORTANT
SAFEGUARDS
NEC
• NATIONAL
ELECTRICAL
CODE
$2898A
t. Read instructions-All
the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions-The
safety and operating instruc-
tions should be retained for future reference.
3. Heed Warnings-All
warnings on the appliance and in
the operating
instructions should be adhered to.
4. Follow Instructions-All
operating and use instructions
should be followed.
5. Cleaning-Unplug
TV from the wall outlet before clean-
ing. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEP'nON:
A product that is meant for uninter-
rupted service and, that for anme specific reason, such
as the possibility of the loss of an authorization
code
for a CATV convener, is not intended to be unplugged
by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in
the cleaning description
otherwise required in item 5.
6. Attachments-Do
not use attachments not recommended
by the TV manufacturer
as they may cause hazards.
7. Water and Moisture-Do not use this "IV near water, for
example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool, and the like,
8. Accessories-Do
not place this TV on an unstable cart,
stand, tripod, bracket, or table. The TV may fall, caus-
ing serious injury to someone, and serious damage to
the appliance.
Use only with a cart, stand, tripod,
bracket, or table recommended
by
the manufacturer,
or sold with the
Pc,_r_mc._rw_
Any mounting of the appliance
should follow the manufacturer's
instructions and should use a
mounting accessory recommended
by the manufacturer, An appliance and cart combina-
tion should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance
and cart combination to overturn,
9. Ventilation-Slots
and openings in the cabinet and the
back or bottom are provided for ventilation and to
ensure reliable operation of the TV and to protect it
from overheating,
these openings must not be blocked
or covered. The openings should never he blocked by
placing the TV on a bed, sofa, rug, or other similar sur-
face. This TV should never be placed near or over a
radiator or heat register. This TV should not he placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufac-
turer's instructions have been adhered to.
10. Power Sources-This
TV should be operated only from
the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local
power company. For TVs intended to operate from bat-
tery power, or other sources, refer to the operating
instructions,
1I. Grounding or Polarization-This
"IV is equipped with a
polarized alternating-current
line plug(a plug having
one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet
Do not defeat the safety purpose of the polarized plug.
12 Power-Cotd Protection-Power-supply
cords should be
routed so that they are not likely to be Walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance,
13. Outdoor Antenna grounding-If
an outside antenna or
cable system is connected to the TV, he sure the anten-
na or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article gl0 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect
to proper grounding of the mast and supporting struc-
tore, grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding
conductors, location of
antenna-discharge
unit, connection to grounding
elec-
trodes, and requirements
for the grounding electrode.
(Fig. A)
14. Lightning-For
added protection for this TV receiver
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it frm'a the
wall outlet and disconnect the antenna or cable system,
This will prevent damage to the TV due to lightning
and power-line surges,
15. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power line_ or other
electric light of power circuits, or where it can fall into
such power lines or circuits, When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal,
!6. Overloading-Do
not Overload wall outlets and exten-
sion cords as this can result in a risk of fire or electric
shock,
17. Object and Liquid Entry-Never push objects of any
kind into this TV through openings as they may touch
dangerous
voltage points or short out parts that could
result in a fire or electric shock, Never spill liquid of
any kind on the TV,
18, Servicing-Do
not attempt to service this TV yourself as
opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to
qualified service personnel,
19. Damage Requiting Service-Unplug
this TV from the
wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a, When the power supply cord or plug is damaged or
frayed.
b. If liquid has been spilled, or objects have fallen into
the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions, as improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified techni-
cian to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in perfor-
mance-this indicates a need for service.
20, Replacement
Parts-Whnn replacement parts are
required, be sure the service technician uses replace-
ment parts specified by the manufacturer
that have the
same characteristics
as the original part. Unauthorized
substitutions may result in fire, electric shock, injury to
persons or other hazards.
21. Safety Check-Upon
completion of any service or
repairs to this TV, ask the service technician to perform
routine safety checks to determine that the TV is in
proper operating condition.
22, Heat-This TV product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
OPERATING
CONTROLS
AND FUNCTIONS
- FRONT PANEL -
- REAR PANEL -
v
oooo
o0
q)
TTT T T T4 /
1
2
3
4
5
6
7
8
- REMOTE CONTROL -
1. EARPHONE
jack- To connect earphone
(not supplied)
for personal
listening.
2. AUDIO
(in) jack- Connect
to the audio
output jack of a video camera or VCR,
3. VIDEO
(in) jack- Connect to the video
output jack of a video camera or VCR.
4. MENU
button- Press to display the menu
on the TV screen.
5. VOLUME
_
buttons-
Press to control
the volume level.
Press to determine
a setting mode from the
menu on the TV screen. (only the VOL •
button)
Press to select or adjust from a particular
menu. (for example: Language Selection,
Channel Presetting, Closed Caption Selection,
Picture Adjustment,
V-CHIP Set Up)
6. CHANNEL
_
buttons-
Press to select
memorized
channel.
Press to select a setting mode from the
menu on the TV screen.
Press to select item you want to adjust in
the picture
control mode.
7. POWER
button-
Press to turn the TV ON
and OFF.
8. Infrared
Sensor
Window-
Receives
the
infrared
control signals from the remote
control unit.
9. CHANNEL
NUMBER
button- Press two
digits to directly
access the desired channel.
Remember
to press a "0" before a single
digit channel.
+100 button-
Press to select cable channels
which are equal or greater
than number
100.
O
15
10.MUTE
button-
Press the MUTE button to
turn off the sound portion
of the TV pro-
gram. (Volume level display turns LIGHT
RED from LIGHT BLUE.)
Press the
MUTE button again or press the VOL(ume)
•
or •
button to restore sound.
11.CHANNEL
RETURN
button-
Press this
button to go back to the previously viewed
channel.
For example,
pressing the CHAN-
NEL RETURN
button once will change
channel display from CH 3 (present
chan-
nel) to CH 10 (previously
viewed channel),
and pressing it a second time will return
from CH 10 to CH 3.
12.DISPLAY
button-
Press to display
the
channel number
on the screen. If you press
it again, the channel number
will disappear.
13.SLEEP
button- Press the SLEEP button to
display the sleep timer and start the func-
tion. The shut off time can be determined
by the number of times you press the but-
ton. (0, 10, 20, 30,..90, 0 minutes)
14.GAME
button-
Press to set the Game
mode and external
input mode at the same
time. Press the GAME
button again to exit
the this mode.
15.ANT(enna).
IN jack- Connect
to an anten-
na, cable system, or satellite system.
16.AC cord- Connect
to a standard AC outlet
(120V/60Hz).
NOTE:
Remove
the AC cord from the
hook to avoid breaking
a wire before you
connect
to a standard AC outlet.
i k'l_ll|1 n n IL._lml u l nl Ii_1ill N_|i ui,,s
Slide
the battery
compartment
cover
on the
remote
unit.
Insert
2 "AA"
penlight
batteries
into battery
compartment
in the direction
as indicated
by
the polarity
(+ / -) markings,
Batteries
installed
with
incorrect
polarity
may
damage
the remote
unit.
Replace
the cover.
