Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
These Cordless Hammer Drills/Drivers are designed for drilling, honing, reaming, hole sawing,
and driving threaded fasteners.
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications
provided with this power tool. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
● Responsibly recycle or dispose of batteries. Do not puncture or burn batteries. Improper
disposal may endanger the environment or cause personal injury.
● Only use Tools with appropriate voltage Ingersoll Rand batteries and charger. Use of any
other batteries may create a risk of fire, personal injury or property damage.
For additional information, refer to Cordless Hammer Drill/Driver Product Safety Manual
Form 04581153, Battery Charger Safety Information Manual Form 10567832 and Battery
Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrand.com
Product Specifications
Voltage
Models
V, DC
D5241
20
D3141
Drive
Models
Type
inch (mm)
D5241
Chuck
D3141
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Conforms to UL STD. 62841-1 & 62841-2-1.
Certified to CSA STD. C22.2 No. 62841-1 & 62841-2-1.
5026893
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
TL-D5200-PIM_ed4
WARNING
Free Speed
High (rpm) Low (rpm)
0-1,800
0-500
Sound Level dB(A)
(EN 62841)
Size
† Pressure
(L
)
p
94
1/2 (13)
71
WARNING
Max. Torque
in-lb (N-m)
1,100 (125)
370 (42)
Vibration
(m/s
)
2
(EN 62841)
‡ Power
Level
*K
(L
)
w
105
1.4
0.6
82
1.5
0.7
EN
Impacts per Min.
High (IPM) Low (IPM)
0-28,000
0-8,000
---
---
Impacting Vibration
(m/s
)
2
(EN 62841)
Level
*K
11.9
3.6
---
---
EN-1
