COMFORT-AIRE RAD-183A Manual De Instrucciones página 14

Idiomas disponibles

Idiomas disponibles

Installation
I. Open the window, Mark a line on the center of
the window stool between the side window stop
molding&
Loosely attach the siil bracket to the support
bracket using the carriage bolt and the look nut.
SJ]U
Bracket
Carriag
Bolt
(M-Screw)
nut
Fig, 5
2. Attach the sill bracket to the window sill using
the screws (Type B),
Carefully place the cabinet on the window sill
and aiign the center mark on the bottom front
with the center line marked window sill,
3. Using the M-screw and the lock nut, attach the
support bracket to the cabinet track hole, Use
the first track hole aRer the sill bracket on the
outer edge of the window sill. Tighten the
carriage bolt and the lock nut. Be sure the
cabinet slan_ outward,
,dkCAUTION
Do not drill a hole inthe bosom pan, The unit is
designed to operate with approximately 1/2" of
water in bottom pan.
4. Pull the boEom window sash down beNnd the
Top retainer bar until they meet.
1. Do not pull the window sash down so tightly
that the movement of Frame curtain is
restricted Attach the cabinet to the window
stool by driving the _rews (Type B) through
the cabinet: into window sill.
2. The cabinet should be installed with a very,
slight tiit downward toward the outside,
Outer edge
of window
sill
B)
Sill bracket
Fig, 6
retainer
bar
Window stool
Frontangle
Fig. 7
Window sash
retainer bar
Frame curtain
Foam-PE
Fig. 8
Front A_ie
Screw(TypeB)
Fig, 9
14
Room Air Conditioner
loading