cecotec READYWARM 2000 MAX BOX CERAMIC Manual De Instrucciones página 39

2. BEFORE USE
This device is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
Box content
Heater
-
Assembly kit
-
Remote control
-
Instruction manual
-
3. INSTALLATION
1. Fix the heater horizontally on a vertical wall, the screen should face the floor without
tilting it. Another position is dangerous.
2. To avoid personal injury, injury and/or damage to the product, ensure that the location
where the heater is to be installed allows for free and unobstructed space as shown in
figure 4.
3. The screws and plugs supplied are suitable for solid walls. For any other type of wall, use
suitable screws and plugs.
4. Drill two holes in the wall and have a distance of 354 mm. In figure 5, you can see the
dimensions of the product and the distances that must be respected for a correct
installation.
5. Once the holes have been drilled, position the heater as shown in figure 6.
READYWARM 2000 MAX BOX CERAMIC
ENGLISH
39