DeWalt DCF787 Traducido De Las Instrucciones Originales página 15

BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF787
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Impact rate
Max. torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the maximum
capapcity of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration and/or noise emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Brushless Cordless Compact Impact Driver
DCF787
DCF787
V 18
DC
D
1
Technical Data are in compliance with:
Li-Ion
2006/42/EC, EN62841-1:2015, EN62841-2-2:2014.
W 280
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
min -1 0–2800
the following address or refer to the back of the manual.
min -1 0–3200
The undersigned is responsible for compilation of the technical
Nm 170
file and makes this declaration on behalf of D
6.35 mm
kg 0.9
Markus Rompel
dB(A) 89
Vice President of Engineering, PTE-Europe
D
dB(A) 100
D-65510, Idstein, Germany
dB(A) 3
28.06.2019
m/s 2 17
m/s 2 2.6
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

which, if not avoided, will result in death or serious injury.

if not avoided, could result in death or serious injury.

if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.


GENERAL POWER TOOL SAFETY WARNINGS

illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
WALT declares that these products described under
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous situation
WARNING: Indicates a potentially hazardous situation which,
CAUTION: Indicates a potentially hazardous situation which,
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings, instructions,
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
EnGLIsh
WALT at
e
WALT.
e
15