Idiomas disponibles
Idiomas disponibles
ENGLISH
Robot vacuum cleaner's Location function
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Cleaning the main brush
-
The main brush rotates at high speed and helps pushing the dirt into the suction mouth.
This brush is in contact with the floor, and therefore with dirt, so it can wear out overtime,
negatively affecting cleaning efficiency. For this reason, it is suggested to replace the main
brush after a maximum of 320 hours or less.
-
Slightly press the main brush frame's tabs to open the main brush compartment and
remove it. Fig. 10
-
Remove hair, lint, and other dirt trapped in the brush and around the shafts with the help
of the self-cleaning brush. Fig. 11
-
Clear and clean the robot vacuum cleaner's suction channel.
-
Reinstall the main brush and its frame.
Recommendation
It is recommended to clean the main brush once a week with the help of the self-cleaning
brush.
Side brush. Fig. 12
The side brush is designed with many bristles that push dirt into the suction mouth and
thoroughly clean edges and corners. This brush may wear out overtime, which will negatively
affect cleaning efficiency.
Recommendation
-
It is recommended to clean the side brush once a week with the help of the self-cleaning
brush.
-
Remove the fixing screw and pull out the side brush.
-
After cleaning, put the brush back in position and fix it again with the screw.
Recommendation
To ensure perfect cleaning, it is recommended to change the side brush every 3 months
(depending on frequency and type of use).
Mixed tank. Fig. 13:
-
Remove the mixed tank.
-
Open the mixed tank cover and empty it.
-
Remove the filter and filter holder as shown in Figure 13.
62
