AEG KPK742280T Manual De Instrucciones página 76

Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
11.3 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and wait until
it is cold.
Step 1
Turn on the oven.
Option
Pyrolytic cleaning, quick
Pyrolytic cleaning, normal
Pyrolytic cleaning, intense
When the cleaning starts, the oven door is locked and the lamp is off. The cooling fan works at a higher
speed.
- press to stop the cleaning before it is completed.
Do not use the oven until the door lock symbol disappears from the display.
Turn off the oven and wait until it
is cold.
76 ENGLISH
Before the Pyrolytic Cleaning:
Remove all accessories and remova‐
ble shelf supports.
Step 2
Press: / Cleaning.
Cleaning mode
Light cleaning
Normal cleaning
Thorough cleaning
When the cleaning ends:
Clean the cavity with a soft cloth.
1
2
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
Select the cleaning mode.
Remove the residue from the bottom of
a mild detergent.
Step 3
Duration
1 h
1 h 30 min
2 h 30 min
the cavity.