STERWINS UP20 Instrucciones De Montaje, Utilización Y Mantenimiento página 215

Ocultar thumbs Ver también para UP20:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
11. During the cutting process, pay attention on the oil level. If oil is not enough, please add the
oil in time.
12. When the wood is fixed on the support, make sure operate the saw with both hands. The saw
fix teeth stuck on the wood, keep the machine stable and properly rotate forward. Pay attention
on the protection of the chainsaw from kickback.
Forbidden usage for chainsaw: hedge trimming
Case 1:
Sometimes, people use pruner saw to trim hedges instead of hedgetrimmer to cut big branches.
This usage is very dangerous, a lot of accidents happened using the machine that way.
Case 2:
Other usage is cutting bundles of wood with pruner saw: 1 hand to carry bundle of wood, and the
other hand for cutting... this is very dangerous usage.
Never immerse your tool, battery pack or charger in fluid
To reduce the risk of fire, personal injury, and product damage due to a short circut, never
immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short circut.
5. TRANSPORTATION
Transporting the machine may require that you meet certain requirements specific to your
country. Please make sure to respect them by contacting the authorities of your country, in
order to respect them all.
Let the machine cool for 2 hours outside before transport it. Ensure temperature during
transportation will never be out of temperature range given on chapter storage. Protect the
product from any heavy impact or strong vibrations which may occur during transportation in
vehicles. Secure the product to prevent it from slipping or falling over.
215
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
loading

Productos relacionados para STERWINS UP20

Este manual también es adecuado para:

20vps2-22.1