Idiomas disponibles
Idiomas disponibles
Setting the DIP Switches
Set the DIP switches according to the required print mode. Before setting the DIP
switches, turn the power off. Change the settings using a small pointed tool such as a
small screwdriver. The factory setting are as follows.
NO. | FUNCTION | _SWON | SWOFF
1
TYPE III
as
|
PAPER
| 2
TYPE lt_|
TYPEI
3
|POSTFEED|
ON
OFF
ASPECT
4:3
11
MEMORY | FRAME | FIELD
DIRECTION | NORM
REV
SCAN
_
WIDE 2
ND
on
|
[o-)
=
Oo
m
Zz
{e)
pel
=
[|
PAPER switch
Leave the PAPER [1] switch at the factory-set position.
PAPER switch
Set the PAPER [2] switch accoring to the type of printing paper being used. For
details of the paper, see page 12.
Type of printing paper
| Switch position
UPP-110S, UPP-110
| TYPE
I (normal)
-
| UPP-110HD
| TYPE II (high density)
|
POSTFEED switch
To feed out extra blank paper once a picture has been printed, set this switch to
ON.
To save paper by feeding only a short length of paper after printing a picture, set
this switch to OFF. You can make more print-outs per roll of printing paper with
this switch set to OFF. But, you have to take out and cut the paper yourself.
