Idiomas disponibles
Idiomas disponibles
Problem
Chain saw does not cut
properly.
Bar and chain running
hot and smoking.
36
Cause
1. Insufficient chain
tension.
2. Dull chain.
3. Chain installed
backwards.
4. Worn chain.
5. Dry or excessively stretched
chain.
6. Chain not in bar groove.
1. Check chain tension for
over tightened condition.
2. Chain oil tank is empty.
3. Debris in guide bar groove.
Remedy
1. Readjust the chain tension,
following the section:
"Adjusting the Chain
Tension".
2. Sharpen the chain cutters,
following the section: "How to
Sharpen the Cutters".
3. Reinstall the saw chain,
following the section:
"Replacing the Bar and
Chain".
4. Replace the chain, following
the section: "Replacing the
Bar and Chain".
5. Check the oil level. Refill the oil
tank if necessary.
6. Reinstall the saw chain,
following the section:
"Replacing the Bar and
Chain".
1. Re-tension the saw chain; see
the section: "Adjusting the
Chain Tension".
2. Filling bar and chain lubricant.
3. Clear the debris in the groove.
