Idiomas disponibles
Idiomas disponibles
Attaching/Detaching the Battery
Pack (Fig . 9 & 10)
WARNING
condition . Therefore, remove the battery
when assembling parts, making
adjustments, cleaning, when the machine is
not in use, or when carrying it at your side .
Removing the battery pack will prevent
accidental starting that could cause serious
personal injury .
To attach the battery pack:
1. Align the ribs of the battery pack with the
mounting slots in the chain saw's battery
port.
2. Slide the battery pack into the machine
until it snaps into position.
Make sure that the latch on
NOTICE
the chain saw snaps into place
and the battery pack is secured to the machine
before beginning operation.
To detach the battery pack:
WARNING
children, or pets when pressing the battery-
release button . Serious injury could result if
the battery pack falls . NEVER remove the
battery pack at a high location .
1. Hold the battery pack in the palm of your
hand.
2. Press the battery-release button with your thumb; the battery pack will disengage from the
latch.
3
Grasp the battery pack and remove it from the chain saw.
Starting/Stopping the Chain Saw
Before Starting the Chain Saw:
1. Remove the battery pack.
2. Make sure that the chain is properly mounted and correctly tensioned.
3. Check the tension of the side-cover knob before use. If it is loose, securely tighten the
side-cover knob.
4. Check the oil level and fill the oil tank as needed. Make sure the chain is well lubricated.
5. Check the cutting teeth sharpness of the saw chain.
6. Make sure that the chain kickback brake paddle moves easily to the brake position,
then pull the chain kickback brake paddle back towards the front handle to the operating
position.
7. Stand upright and hold the chain saw in a relaxed position.
8. Hold the chain saw with both hands: with the right hand on the rear handle and the left
hand on the front handle.
Battery machines are
always in operating
Always be aware for the
location of your feet,
Fig . 9
Fig . 10
Battery-release
Button
19
