TERMA VEO SMART WI-FI Manual página 16

ADDITIONAL COMMENTS ON ADDING DEVICES TO THE TERMA SMART SYSTEM
(APPLIES TO ALL SMART DEVICES)
• Adding devices is possible only via the mobile application.
• System changes are sent locally by the router, and to the cloud service by
the application.
• In some Android system overlays, during pairing, the phone tries to auto-
matically switch to the remembered Wi-Fi network with Internet access
— you must manually confirm the connection with the device's network.
• After adding the heating devices to the system, they are turned off by de-
fault (they do not heat up, despite the low ambient temperature, the in-
terface bars are not lit, and the remote communication interval is 1 h).
• Heating devices should be added first, followed by the sensors.
• There can be only one temperature and humidity sensor (VTS) in one he-
ating zone.
• The option of ʻcombine into a set' is available only for the heating element
and the thermostatic head installed in the same central heating radiator,
and only during the installation of the second device.
• The name of each device must be unique within the system.
• The name of the zone must be unique within the system.
16