FIG.11
17. Attach the Control Box (#16) to middle of the Tube - 11 (#11) using two Bolts (#30) as
shown in FIG.11A.
18. Run the rest of the Control Wire through the loops on the Ball Return Net (#20). Place
the Control Wire on the Tube - 11 (#11) using the Self-Stick Straps (#34) as shown in
FIG.11.
FIG.12
19. Connect the Sensor Wire from Switch Sensor (#15) to the Electronic Scorer (#14) as
shown in FIG. 12. Connect the Control Wire to the Electronic Scorer (#14) as shown
in FIG.12 and 12A.
14
P4
FIG.13
20. Fold the Basketball Arcade Machine when not in use and insert the Lock Pin (#P4) as
shown in FIG.13.
Note: The lock pin (#P4) needs to be removed from its original position when the
machine is being used before insertion to the new position when folded.
#P4
15