Idiomas disponibles
Idiomas disponibles
To attach
the
wire
whip,
flat
beater
or dough
hook
1. Make sure that the touch wheel control is set to "OFF"
and tile mixer is unplu_ed.
2. Press the mixer head release button and lilt the mixer
i
head up until it locks into place.
3. Insert desired attachment onto attachment post and
press upward as tar as possible.
4. Turn the attachment clockwise, hooking the attachment
to the post.
5. F,e sure the bowl is attached to the mixer betore operat
ing (see page 7).
",
6. Lower the mixer head by pressing the mixer head release
button and guiding the mixer heacl down caretullv with your hands.
7. Plug power cord into a grounded 3 prong electrical outlet.
8.Your mixer is adjusted at the tactory so that the fiat beater just clears the hot
tom of the bowl. Should the fiat beater strike the bottom of the bowl or is too
tar away fl'om the bowl, clearance can be corrected as h)llows:
• Lilt mixer head.
• Turn the mixer head adjustment screw counterclock
wise to raise the head and clockwise to lower
the head.
• Make this adjustment using the fiat beater until it
just clears the bottom of the bowl.
Adjustment
Screw
