Idiomas disponibles
Idiomas disponibles
Wiper maintenance:
The wiper blade is subject to wear due to rubbing against the floor. When the water absorption efficiency
drops significantly, the following checks should be carried out.
1) Whether there are foreign bodies on the wiper.
2) Whether there are any contaminants on the suction connection.
3) By adjusting the wiper wheel, you can lower the wiper (see figure below).
4) Check the wear of the wiper edge. If the wear is significant, the wiper can be mounted in reverse so
that now it is the opposite edge that is used.
Activities after working with the device
1)
Wipe the outside of the device with a dry and damp cloth.
2)
Empty and rinse the dirty water tank.
3)
Park the device in a flat, dry place, protected from the elements and direct sunlight.
4)
Before long-term storage, completely dry the device and cover it with a material that will protect the
device from dust. It is recommended to charge the battery regularly.
3.5.
Cleaning and maintenance
a)
Pull the mains plug and let the unit cool down completely before cleaning, adjusting or replacing
accessories and when the unit is not in use. Wait until the rotating parts stop.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
After each cleaning, all parts should be thoroughly dried before the device is reused.
d)
Store the unit in a dry and cool place protected from moisture and direct sunlight.
e)
Do not spray the unit with a stream of water or immerse it in water.
f)
Clean the ventilation openings with a brush and compressed air.
g)
Perform regular inspections of the unit checking technical fitness and any damages.
h)
Use a soft cloth for cleaning.
Instructions for the safe disposal of batteries.
A rechargeable battery is installed in the devices.
Disassemble the used batteries from the device in the same way as you assemble them.
Return the batteries to a unit responsible for their disposal.
